Maxi Cup Automatic Drinker

In stock

Weight : 0.160kg

Description

Maxi Cup Automatic Drinker : Turn a can into an automatic
drinkerMaxi Cup is a semi-automatic drinker designed to use old tanks.
€17.99

€17.99

In stock

Full Description

Maxi Cup Automatic Waterer : Turn a can into an automatic
watererMaxi Cup is a semi-automatic waterer designed to use old water tanks, buckets, feed containers and turn them into drinking water tanks for your birds. Maxi Cup is a self-filling, multi-purpose large capacity waterer. It can be installed on any water tank with a water depth of up to 180 cm and is ideal for outdoor and indoor use.
The Maxi Cup Drinker is very durable and suitable for most domestic poultry, game, wild birds, cats, small dogs, etc.

Installation:
Simply drill the water tank with a 12mm drill to a height suitable for your birds or pets.
Adjust the Maxi Cup by removing the nut and filter, place the Maxi Cup point into the hole with the washer on the outside and tighten the nut until it forms a seal with the wall of the tank - then place the filter behind the nut. Fill the container with water, check the angle and tighten if necessary.
The Maxi Cup Drinker is also easy to maintain, simply unscrew the two screws that secure the lid, separate the two halves and clean the float and the inside of the housing and reassemble.
Weight of the drinker 160g

Technical details

Type of installation
On water reserve
Material
Plastic
Reference
295.0018.

Full description

Maxi Cup Automatic Waterer : Turn a can into an automatic
watererMaxi Cup is a semi-automatic waterer designed to use old water tanks, buckets, feed containers and turn them into drinking water tanks for your birds. Maxi Cup is a self-filling, multi-purpose large capacity waterer. It can be installed on any water tank with a water depth of up to 180 cm and is ideal for outdoor and indoor use.
The Maxi Cup Drinker is very durable and suitable for most domestic poultry, game, wild birds, cats, small dogs, etc.

Installation:
Simply drill the water tank with a 12mm drill to a height suitable for your birds or pets.
Adjust the Maxi Cup by removing the nut and filter, place the Maxi Cup point into the hole with the washer on the outside and tighten the nut until it forms a seal with the wall of the tank - then place the filter behind the nut. Fill the container with water, check the angle and tighten if necessary.
The Maxi Cup Drinker is also easy to maintain, simply unscrew the two screws that secure the lid, separate the two halves and clean the float and the inside of the housing and reassemble.
Weight of the drinker 160g

Technical details

Type of installation
On water reserve
Material
Plastic
Reference
295.0018.

Any question about this product ?

Contact a consultant

Contact us on Facebook

--> @ducatillonosterreich