Micro-suction hose

The Micro-Suction Hose is a water and time saving irrigation system.

It is a woven polyester hose, where water oozes down the entire length.

Incomparable for its water saving, its ease of use (even works by gravity) and its versatility. It can be used on the surface, buried or even under a mulch...

The hose is very difficult to clog because it is not affected by hard water or water with a high mineral content. It requires no maintenance. It can be installed in the garden as easily as it can be dismantled and takes up a minimum of space.

To store it in the fall, simply roll it up, one person is largely sufficient for installation or dismantling. Extremely strong, it can be pulled out of the row by one end for storage.

- Standard connection to any water supply system.

- Operating pressure: 0.2 to 0.4 bar.

- Use the pressure reducer offered as an accessory, otherwise the high pressure deforms the TMS. and consumption becomes too high.

- Supply from a tank or a water reserve: it is imperative to have a height of 1.5 m to 2 m between the tank tap and the TMS. If the height is too low, there is not enough pressure and a pump must be added.

- The TMS does not bend, so an elbow must be used (otherwise it would flatten and the low water pressure would not be enough).

- Beyond 25 meters of TMS, a second water supply must be provided at the other end, as the low pressure to be used is not sufficient to supply a too long length.